Dongguan Bai-tong Hardware Machinery Factory
Dongguan Bai-tong Hardware Machinery Factory Expert In Surface Finishing
Add to Cart
Dustless Low Noise Fibre Glass Body Manual Water Sandblaster For Aluminum Products
Model:6868WA
Technical Specifications:
| Technical specifications | Chamber dimension | 680X680X500mm |
| Load Capacity | less than 10kgs | |
| Motor for pump | AC220v,50Hz, 550w | |
| Air consumption | 0.8~1.2m³/min | |
| Air pressure | 0.3~0.7MPa | |
| Diameter of blasting hose | Φ13mm*23mm | |
| Lighting | AC220v, 13w | |
| Quantity of gun | 1pc | |
| Initial media feeding | 5~10kgs(together with 25kgs water) | |
| Power supply | 220v, 50hz |
Wet Sandblaster Series(Fibre Glass Body):
| model | dimension of cabinet(mm) | quantity of gun | raw material of cabinet | remarks |
| 6868W | 680X680X600 | 1pc | fibre glass | optional s/s body |
| 9065W | 900X650X600 | 1pc | fibre glass | optional s/s body |
| 9090W | 900X900X700 | 1pc | fibre glass | optional s/s body |
| 1212W | 1200X1200X800 | 1pc | fibre glass | optional s/s body |
1. Pretreatment: Electroplating, spray paint, spray, etc. All are covered sandblasting before machining, surface is absolutely clean, at the same time greatly improve the coating adhesion and corrosion resistance ability.
2. Clean up: Casting parts, stamping parts, welding parts, such as metal artifacts to scale, residue, dirt; Cleaning the surface of non-metallic products, ceramic embryo dark spots on the surface of the clear lacquer and reduction pattern, etc.
3. Old refurbished: Automobile, motorcycle, mechanical and electrical equipment and clean all moving parts. At the same time, eliminate fatigue stress, prolong service life.
4. Finishing: All metal and non-metal products (plastic, crystal, glass, etc.) can eliminate surface, dumb matte processing, make the product surface level.
5. Mold processing: Mold surface and matte treatment, graphic production, as well as mold cleaning, do not hurt and die surface, ensure accuracy of mould.
6. Burrs treatment: Small burr removal machining parts, plastic injection parts glue burrs.
7. Bad product rework: Bad product coating removal, remove bad surface coloring and printing.
8. Enhance the hardness on the surface of the metal, eliminate stress, such as the plane leaves, spring, mechanical cutters and weapons and other surface treatment.
9. Etching antiskid processing: Etching pattern in the surface of metal products and non-metallic products, words and antiskid processing, such as marble, handle non-slip, seal, stone lettering, etc.
10. The processing of jeans: Jeans sanding, pale and cat must effect is achieved.
Applications:
1. Dust-free wet blasting, reduces worker exposure to dust and particles, reduces static electricity build-up generated by dry blasting.
2.Long blasting gloves(24"), wear resisting rubber,effectively protect oprtator
3. Reinforced fiber glass cabinet provide rust-free blasting environment.
4. Safety interlocks interrupt blasting if either door is opened.
5. Sopylights brightly illuminates work chamber.
6. Exhauster maximizes visibility inside cabinet.
7. Electric powered Windscreen wipers maintains clean window for clear view of work.
8. Foot pedal activates blast process and minimizes operator fatigue.
9. Built-in fingertip-activated squirt gun rinsing the parts inside the working cabinet.
10. Pressure regulator, gauge, and electric switch mounted within easy reach.
Competitive Advantage:
The rusting cleaning part adopts high-efficient blast wheel and full shutter type shot sand separator.
The sweeping machine adopts specially made high-strengh nylon rolling brush and high-pressure ventilator.
The preheating and drying parts may adopt various heating methods.
The paint spraying part adopts high-pressure airless spraying method.