Dongguan Bai-tong Hardware Machinery Factory
Dongguan Bai-tong Hardware Machinery Factory Expert In Surface Finishing
Add to Cart
Reinforced Fibre Glass Body Manual Wet Sandblast Cabinet For Jewelry Surface Treatment
Technical Specifications:
| Technical specifications | Chamber dimension | 1200X1200X800mm |
| Load Capacity | less than 10kgs | |
| Motor for pump | AC220v,50Hz, 1100w | |
| Air consumption | 0.8~1.2m³/min | |
| Air pressure | 0.3~0.7MPa | |
| Diameter of blasting hose | Φ13mm*23mm | |
| Lighting | AC220v, 13w,LED | |
| Quantity of blast gun | 1pc | |
| Initial media feeding | 5~10kgs(together with 25kgs water) | |
| Power supply | 220v, 50hz |
Model:1212WF
Manual wet sandblasting
Suction type sandblasting
Fibre glass body, light and long life use, optional stainless steel body
Motor for pump: 220V, 50Hz, 1100W, optional 380V, 50Hz, 1100W
PU pump system, wear resistant
Pedal switch
Lighting inside cabinet: 220V, 50Hz, 13w, LED
One sandblasting gun, with 8*20*60mm boron carbide nozzle
One pc water cleaning gun
Exhaustor fan for water fog, 220V, 50Hz, 38W, 2pcs
Interlock switch on side door--when door is opened, sandblasting stop to protect operator
Abrasive media used: glass beads, brown aluminum oxide, white aluminum oxide,etc
Compressed air needed: pressure 2-7bar, air flows 0.8-1.5 m3/min
Wet Sandblaster Series(Fibre Glass Body):
| model | dimension of cabinet(mm) | quantity of gun | raw material of cabinet | remarks |
| 6868W | 680X680X600 | 1pc | fibre glass | optional s/s body |
| 9065W | 900X650X600 | 1pc | fibre glass | optional s/s body |
| 9090W | 900X900X700 | 1pc | fibre glass | optional s/s body |
| 1212W | 1200X1200X800 | 1pc | fibre glass | optional s/s body |
1. Pretreatment: Electroplating, spray paint, spray, etc. All are covered sandblasting before machining, surface is absolutely clean, at the same time greatly improve the coating adhesion and corrosion resistance ability.
2. Clean up: Casting parts, stamping parts, welding parts, such as metal artifacts to scale, residue, dirt; Cleaning the surface of non-metallic products, ceramic embryo dark spots on the surface of the clear lacquer and reduction pattern, etc.
3. Old refurbished: Automobile, motorcycle, mechanical and electrical equipment and clean all moving parts. At the same time, eliminate fatigue stress, prolong service life.
4. Finishing: All metal and non-metal products (plastic, crystal, glass, etc.) can eliminate surface, dumb matte processing, make the product surface level.
5. Mold processing: Mold surface and matte treatment, graphic production, as well as mold cleaning, do not hurt and die surface, ensure accuracy of mould.
6. Burrs treatment: Small burr removal machining parts, plastic injection parts glue burrs.
7. Bad product rework: Bad product coating removal, remove bad surface coloring and printing.
8. Enhance the hardness on the surface of the metal, eliminate stress, such as the plane leaves, spring, mechanical cutters and weapons and other surface treatment.
9. Etching antiskid processing: Etching pattern in the surface of metal products and non-metallic products, words and antiskid processing, such as marble, handle non-slip, seal, stone lettering, etc.
10. The processing of jeans: Jeans sanding, pale and cat must effect is achieved.
Applications:
1. Dust-free wet blasting, reduces worker exposure to dust and particles, reduces static electricity build-up generated by dry blasting.
2.Long blasting gloves(24"), wear resisting rubber,effectively protect oprtator
3. Reinforced fiber glass cabinet provide rust-free blasting environment.
4. Safety interlocks interrupt blasting if either door is opened.
5. Sopylights brightly illuminates work chamber.
6. Exhauster maximizes visibility inside cabinet.
7. Electric powered Windscreen wipers maintains clean window for clear view of work.
8. Foot pedal activates blast process and minimizes operator fatigue.
9. Built-in fingertip-activated squirt gun rinsing the parts inside the working cabinet.
10. Pressure regulator, gauge, and electric switch mounted within easy reach.